Different types of AST NJ311 E Cylindrical Roller Bearing | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | e | B | C | F | d | S | m | D |
| Z-531167.04.DRGL | FAG | - | 315 mm | 243 mm | - | 380 mm | - | - | 960 mm |
| Z-531168.04.DRGL | FAG | - | 330 mm | 258 mm | - | 400 mm | - | - | 1 010 mm |
| Z-531177.04.DRGL | FAG | - | 280 mm | 240 mm | - | 300 mm | - | - | 780 mm |
| YSA 211-2FK + H 2311 | SKF | - | 40 mm | 25 mm | - | 50 mm | - | - | 100 mm |
| YSA 211-2FK + HA 2311 | SKF | - | 40 mm | 25 mm | - | 49.212 mm | - | - | 100 mm |
| YSA 211-2FK + HE 2311 B | SKF | - | 40 mm | 25 mm | - | 50.8 mm | - | - | 100 mm |
| YSA211-2FK+HE2311 | SKF | - | 40 mm | 43,6 kN | - | 50,8 mm | - | - | 100 mm |
| ZSL192311 | NBS | - | 43 mm | 255 kN | 67,11 mm | 55 mm | 3 mm | - | 120 mm |
| WS22311-E1-2RSR | FAG | 0,36 | 49 mm | - | - | 55 mm | - | 2,9 kg / Weight | 120 mm |
| Z-531149.04.DRGL | FAG | - | 90 mm | 69 mm | - | 100 mm | - | - | 260 mm |
| Z-531150.04.DRGL | FAG | - | 105 mm | 80 mm | - | 120 mm | - | - | 300 mm |
| Weight | 11.0 lb |
| Oil Lubrication - M/N Seal | 2200 rpm |
| Dimension J (Bolt Size) | 0.625 in |
| Adapter Sleeve Axial Movement Max | 0.022 in |
| Pre Install Clearance Max | 0.0037 in |
| Post Install Int Radial Clearance Min | 0.0015 in |
| Int Radial Clearance Reduction Min | 0.0012 in |
| Dimension R | 0.5 in |
| Dimension S | 2.32 in |
| Dimension BC | 6.36 in |
| Dimension H | 1.00 in |
| Bearing Number | 22211 |
| Dimension C | 2.95 in |
| Dimension E | 4.50 in |
| Dimension L Fix | 2.82 in |
| C0 - Static Load | 31900 lb |
| Float | 0.050 in |
| e - Geometry Factor | 0.26 |
| Pre Install Clearance Min | 0.0030 in |
| Dimension L Exp | 2.87 in |
| AST NJ2320 EM Cylindrical Roller Bearing | Clearance:C3; Bore Size d:85 mm; Outside Ring Width B:22.000 mm; Weight:0.85 Kg; Outside Diameter D:130.000 mm; C0r - Static Load Rating:44.5 kN; Features:Shields; Cr - Dynamic Load Rating:52.8 kN; Oil Reference Speed:7900 rpm; Grease Reference Speed:5400 rpm; Radius Rs min:1.100 mm; |
| AST NJ2318 EM Cylindrical Roller Bearing | Oil Reference Speed:6500 rpm; Bore Size d:100 mm; C0r - Static Load Rating:92.7 kN; Weight:3.2 Kg; Cr - Dynamic Load Rating:122 kN; Radius Rs min:2.100 mm; Features:O.D. Groove; Grease Reference Speed:4500 rpm; Outside Ring Width B:34.000 mm; Clearance:C3; Outside Diameter D:180.000 mm; |
| AST NJ2318 EMA Cylindrical Roller Bearing | Min. Loose Transition Fit S:95.217 mm; Dimension B:2.500 in; Shaft Diameter:3.750 in; Min. Interference Fit:95.263 mm; Dimension D:3.750 in; Used with Bearing Designation:HJ-729640; Chamfer rsmin:0.10 in; Weight:3.450 lb; Max. Interference Fit:95.278 mm; Dimension F:4.500 in; Max. Loose Transition Fit S:95.237 mm; |
| AST NJ2315 EMA Cylindrical Roller Bearing | Clearance:C3; Bore Size d:85 mm; Outside Ring Width B:22.000 mm; Weight:0.85 Kg; Outside Diameter D:130.000 mm; C0r - Static Load Rating:44.5 kN; Features:Shields; Cr - Dynamic Load Rating:52.8 kN; Oil Reference Speed:7900 rpm; Grease Reference Speed:5400 rpm; Radius Rs min:1.100 mm; |
| AST NJ2317 EMA Cylindrical Roller Bearing | R - Cone Backface To Clear Radius1:5.990 mm; d:100 mm; r - Cup Backface To Clear Radius2:2.49 mm; Cone Part Number:XAA32220M; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):#N/A; C90 - Dynamic Radial Rating (90 million revolutions)4:95300 N; Ab - Cage-Cone Frontface Clearance:0.51 mm; G2 - Heat Generation Factor (Rib-Roller End):#N/A; Aa - Cage-Cone Backface Clearance:5.33 mm; B:49.000 mm; Y - ISO Factor9:1.43; db - Cone Backface Backing Diameter:118.11 mm; B - Cone Width:46.000 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:68600 N; da - Cone Frontface Backing Diameter:114.05 mm; Da - Cup Frontface Backing Diameter:171.96 mm; Cg - Geometry Factor:0.1; C1 - Dynamic Radial Rating (1 million revolutions)5:368000 N; e - ISO Factor8:0.42; |
| AST NJ2330 EMA Cylindrical Roller Bearing | Cage Type:Pin-Type; Da - Cup Frontface Backing Diameter:531.10 mm; G1 - Heat Generation Factor (Roller-Raceway):4640; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:77800 lbf; Db - Cup Backface Backing Diameter:510.03 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:109000 lbf; C0 - Static Radial Rating:886000 lbf; Cup Part Number:M667911; d:387.248 mm; D:546.100 mm; r - Cup Backface To Clear Radius2:6.35 mm; K - Factor7:1.4; e - ISO Factor8:0.42; db - Cone Backface Backing Diameter:423.93 mm; Ab - Cage-Cone Frontface Clearance:4.8 mm; Aa - Cage-Cone Backface Clearance:6.1 mm; B - Cone Width:87.313 mm; a - Effective Center Location3:17.8 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:420000 lbf; Cone Part Number:M667935; |
| AST NJ2315 EM Cylindrical Roller Bearing | Min. Loose Transition Fit S:95.217 mm; Dimension B:2.500 in; Shaft Diameter:3.750 in; Min. Interference Fit:95.263 mm; Dimension D:3.750 in; Used with Bearing Designation:HJ-729640; Chamfer rsmin:0.10 in; Weight:3.450 lb; Max. Interference Fit:95.278 mm; Dimension F:4.500 in; Max. Loose Transition Fit S:95.237 mm; |
| AST NJ2330 M Cylindrical Roller Bearing | r - Outer Ring To Clear Radius2:3.0 mm; B - Outer Ring Width:120 mm; R - Inner Ring To Clear Radius1:3.0 mm; C0 - Static Radial Rating:2360000 N; Cage Type:EMB; Design Unit:METRIC; Reference Thermal Speed Rating (Grease):1200; e - ISO Factor3:0.32; C1(2) - Dynamic Radial Rating (Two-Rows):2000000 N; Superseded Part:22334YMBW33W800C4; Da - Outer Ring Backing Diameter:325.000 mm; Reference Thermal Speed Rating (Oil)7:1400; B - Inner Ring Width:120 mm; D:359.993 mm; Y0 - ISO Factor4:2.11; UPC Code:087796231580; Y2 - ISO Factor6:2.07; Bearing Weight:59.9 Kg; Cage Material:Brass; Cg - Geometry Factor8:0.0955; |
| AST NJ2320 EMA Cylindrical Roller Bearing | G2 - Heat Generation Factor (Rib-Roller End):9.36; Cg - Geometry Factor11:0.0736; Series:M86600; C - Cup Width:0.6563 in; G1 - Heat Generation Factor (Roller-Raceway)10:16.8; r - Cup Backface To Clear Radius2:0.06 in; C0 - Static Radial Rating:16100 lbf; C1 - Cup Flange Width:0.1575 in; Cup Part Number:M86611-B; D1 - Flange Outer Diameter:2.7559 in; Cone Part Number:M86649; B - Cone Width:0.8438 in; C1 - Dynamic Radial Rating (1 million revolutions)5:13500 lbf; d:1.1875 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:3280 lbf; Bearing Weight:0.8 lb; R - Cone Backface To Clear Radius1:0.06 in; a - Effective Center Location3:-0.13 in; da - Cone Frontface Backing Diameter:1.5 in; Cage Type:Stamped Steel; |
| AST NJ2315 E Cylindrical Roller Bearing | e - ISO Factor8:0.33; d:11.9940 in; R - Cone Frontface To Clear Radius1:0.130 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:64300 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:432000 lbf; Design Units:Imperial; G1 - Heat Generation Factor (Roller-Raceway)11:2100; T - Bearing Width across Cups:5.1875 in; Db - Cup Backface Backing Diameter:16.14 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:112000 lbf; Cg - Geometry Factor12:0.165; G2 - Heat Generation Factor (Rib-Roller End):262; r - Cup Backface To Clear Radius2:0.130 in; Y2 - ISO Factor10:3.03; D:17.2460 in; K - Factor7:1.76; Cup Part Number:329172; Ab - Cage-Cone Frontface Clearance:0.17 in; B - Double Cone Width:5.1875 in; Aa - Cage-Cone Backface Clearance:0 in; |
| AST NJ2328 MW3 Cylindrical Roller Bearing | Min. Loose Transition Fit S:95.217 mm; Dimension B:2.500 in; Shaft Diameter:3.750 in; Min. Interference Fit:95.263 mm; Dimension D:3.750 in; Used with Bearing Designation:HJ-729640; Chamfer rsmin:0.10 in; Weight:3.450 lb; Max. Interference Fit:95.278 mm; Dimension F:4.500 in; Max. Loose Transition Fit S:95.237 mm; |
| AST NJ232 EMA Cylindrical Roller Bearing | G:M40x1.5; Lockwasher and Lockplates:MB8; Locknut:KM8; D3:58 mm; C:10 mm; Weight:0.22 Kg; L1:36.00 mm; d1:1 1/4 in; |
| AST NJ2314 EMA Cylindrical Roller Bearing | G2 - Heat Generation Factor (Rib-Roller End):147; K - Factor2:1.27; C - Cup Width:23.000 mm; Series:JP17000; r - Cup Backface To Clear Radius1:3.05 mm; e - ISO Factor3:0.46; Y - ISO Factor4:1.3; Cup Part Number:JP17010; Design Units:METRIC; D:230.000 mm; Da - Cup Frontface Backing Diameter:223.01 mm; Db - Cup Backface Backing Diameter:216.92 mm; G1 - Heat Generation Factor (Roller-Raceway):339; Cg - Geometry Factor:0.1; |
| AST NJ2328 EM Cylindrical Roller Bearing | N:15 mm; Locating Rings (width x OD):SR110X10.5; G:M12; H1:70.0 mm; Seal:TSNG310; Max Grease Speed:4900; H:134 mm; H2:30 mm; J2:234 mm; Housing Mass:5.30 Kg; Bolt Qty:2; Max Oil Speed:5900; Seal Type:Double Lip; A1:70 mm; L:255 mm; Housing:FSNT 512-610; N1:20.00 mm; C0 Static Load Rating:151; UPC Code:999999999; Bearing:21310; |
| AST NJ2318 MA Cylindrical Roller Bearing | N:15 mm; Locating Rings (width x OD):SR110X10.5; G:M12; H1:70.0 mm; Seal:TSNG310; Max Grease Speed:4900; H:134 mm; H2:30 mm; J2:234 mm; Housing Mass:5.30 Kg; Bolt Qty:2; Max Oil Speed:5900; Seal Type:Double Lip; A1:70 mm; L:255 mm; Housing:FSNT 512-610; N1:20.00 mm; C0 Static Load Rating:151; UPC Code:999999999; Bearing:21310; |
| AST NJ232 EM Cylindrical Roller Bearing | r - Outer Ring To Clear Radius2:3.0 mm; B - Outer Ring Width:120 mm; R - Inner Ring To Clear Radius1:3.0 mm; C0 - Static Radial Rating:2360000 N; Cage Type:EMB; Design Unit:METRIC; Reference Thermal Speed Rating (Grease):1200; e - ISO Factor3:0.32; C1(2) - Dynamic Radial Rating (Two-Rows):2000000 N; Superseded Part:22334YMBW33W800C4; Da - Outer Ring Backing Diameter:325.000 mm; Reference Thermal Speed Rating (Oil)7:1400; B - Inner Ring Width:120 mm; D:359.993 mm; Y0 - ISO Factor4:2.11; UPC Code:087796231580; Y2 - ISO Factor6:2.07; Bearing Weight:59.9 Kg; Cage Material:Brass; Cg - Geometry Factor8:0.0955; |
AST NJ311 E Cylindrical Roller Bearing Video
AST NJ311 E cylindrical roller bearings - NTN Mettmann(Deutschland)
Brand Name: AST. Model Number: NJ311 E. Da: 180 mm. Max. speed for PosiTrac Plus seal: 1950 r/min. Bearing: 1317 K. H: 222.25 mm. PosiTrac Plus contact
AST NJ311 E cylindrical roller bearings - NJ311 E bearing
Various 6 mm r1,2 min. 700 mm D cylindrical roller bearings types and sizes to accommodate your AST NJ311 E cylindrical roller bearings requirements
Bearing NJ 311 / URB 55x120x29 Single row cylindrical-roller
NJ 311 / URB - Single row cylindrical-roller bearing NJ 311 Brand:URB Размер:55X120X29 d (inner ... NJ 311 E, URB, 55 x 120 x 29 mm, In Stock, 42.43 лв
NJ311E Cylindrical Roller Bearing | AST Bearings
NJ311 E cylindrical roller ball bearing drawings. Unless otherwise specified, the internal radial clearance is "C0" or "C Normal". This bearing is also available
Buy AST NJ311 E cylindrical roller bearings - JAPAN IMPORTED
How SKF Brand do I place an EMERGENCY order for a AST NJ311 E cylindrical roller bearings that I want Polymer Cage Material to pick up at a our store?
AST NJ311 E cylindrical roller bearings - NTN Mettmann(Deutschland)
YOU'LL FIND AN EXTENSIVE SELECTION OF 180 mm Da AST NJ311 E cylindrical roller bearings FOR SALE. 1950 r/min Max. speed for PosiTrac Plus seal
AST NJ311 E cylindrical roller bearings - NJ311 E bearing
Brand Name: AST. Model Number: NJ311 E. r1,2 min.: 6 mm. D: 700 mm. da max.: 586 mm. Misalignment factor k1: 0.113. Limiting speed: 900 r/min. d2 ≈: 555
NJ311 E Cylindrical Roller Bearings AST Bearings | GBS Bearing
FAG BEARING NJ311-E-TVP2-C3 | Leader Beari... Bearings>Roller Bearings>Cylindrical Roller Bearings>NJ311-E-TVP2-C3NJ311E.TVP2.C3 CYLINDRICAL
Bearing NJ311 E (AST) | Size and Specification | Bearings Online
Cylindrical Roller Bearings NJ311 E. Bearing number : NJ311 E. Size (mm) : 55x120x29. Brand : AST. Bore Diameter (mm) : 55. Outer Diameter (mm) : 120
Cylindrical Roller Bearing NJ311-E | Get it now!, 34,56 €
Cylindrical Roller Bearing NJ311-E 55x120x29 | reasonable > simplified mounting & dismounting > for high radial + axial loads in one direction >> Click here